Cisco and NVIDIA have announced a project for a pluggable optical form factor, USFP, capable of supporting 400 Gb/s per lane. Cisco is also unveiling the Silicon One G302 switching chip, rated at 51.2 Tb/s.[1] These announcements address a key challenge for AI infrastructure: accelerators must exchange data quickly enough for the installed computing power to be genuinely usable. They do, however, concern separate components and timelines.
GPUs need to receive and share data
When processing is spread across several accelerators, part of the work depends on exchanges between machines. Waiting for data or for results from another node can slow down the entire computation. Adding GPUs is therefore not always enough to speed up a task if the network or storage is already limiting how fast they are fed.
The difficulty lies in locating the bottleneck. A saturated link, occasional congestion, poor traffic distribution or overly slow storage can all produce similar symptoms. The response must be based on measurements of the workload actually being run, before choosing faster equipment.
G302 powers the rack network while USFP prepares the optics
The G302 is aimed at top-of-rack switches, which connect servers to the data centre network. Cisco is announcing 200 Gb/s SerDes electrical interfaces and expects first shipments before the end of 2026.[1] The 51.2 Tb/s figure refers to aggregate switching capacity, not the throughput of an individual connection.
USFP, developed with NVIDIA, is a proposed optical module form factor. The partners plan an open specification.[1] A distinction must therefore be drawn between the chip being presented and this optical development, rather than attributing already available 400 Gb/s lanes to the G302.
Three figures that describe different things
Throughput is expressed here in bits per second. Aggregate capacity does not correspond to the usable throughput guaranteed to an application.
| Metric | What it describes | What it does not prove |
|---|---|---|
| 51.2 Tb/s | Switching capacity of the G302.[1] | The throughput available to each server. |
| 400 Gb/s per lane | Target per-lane capacity for USFP.[2] | The immediate availability of a complete link. |
| 6.4 Tb/s aggregate | 16 lanes at 400 Gb/s in the USFP project.[2] | An equivalent speed-up of AI applications. |
Density also depends on the number of lanes
The Cisco blog describes 16 lanes at 400 Gb/s, i.e. 6.4 Tb/s aggregate, with a possible evolution to 32 lanes and 12.8 Tb/s. It compares this proposal with 1.6 Tb/s pluggable modules to claim a fourfold increase in bandwidth density.[2] This factor therefore does not stem solely from doubling the per-lane throughput.
Maintenance matters as much as peak throughput
Cisco highlights the retention of field-replaceable modules and established operating practices for pluggable optics.[2] For an operator, the ability to service a module can weigh on the choice of architecture, just as much as throughput or footprint.
Higher density must nonetheless be assessed against cooling, cabling and spare-part availability constraints. The number of interventions, replacement lead times and compatibility conditions can change the real cost of an infrastructure over several years.
Energy gains have yet to be measured on the complete system
Cisco mentions energy efficiency potentially improved by around 1.3 times thanks to 400 Gb/s SerDes.[2] This indication does not mean that a data centre’s total consumption will fall in the same proportion. Higher capacity may also come with an increase in processing volumes.
A meaningful comparison must specify the load, the throughput actually carried and the scope measured. It should include network equipment, optics and cooling. The announcements reviewed do not present an independent benchmark that would allow the gain to be generalised to all environments.
SMEs can draw a sizing method from this
Most SMEs do not need to prepare a network for these speeds right away. However, an organisation that runs several GPU servers or buys remote computing capacity needs to understand what is limiting its workloads. The network is part of the service to be assessed, even when it is managed by a provider.
An illustrative scenario is to compare the same task on one and then several servers, observing duration, GPU utilisation and network traffic. If the time saving remains small, the team also examines storage and how the work is distributed. This test helps establish a diagnosis; it does not prove that the network is necessarily to blame.
The key IT skill: Systems and Network Administration
This development directly calls on Systems and Network Administration. Professionals must understand the paths data takes and distinguish theoretical throughput from observed performance. A capacity stated on a datasheet is not enough to size a service.
Their role includes analysing congestion, latency and dependencies on storage or compute. They must also check interfaces, optical modules and compatible software versions. These checks help avoid an investment that would simply move the bottleneck elsewhere.
Finally, network administration involves monitoring and incident recovery. Metrics must make degradations visible before they have a lasting impact on workloads. Having maintenance access and replacement procedures remains essential, even on a very high-performance infrastructure.
The value of USFP will therefore depend on performance measured on applications, equipment compatibility and operating conditions. To size an infrastructure, the real limits of compute, network and storage must first be identified.
Further reading
Four CCCLX reads on data centres, data and AI infrastructure.
AI powers Nokia: data centres reshape the networking market
Google Cloud Storage Intelligence Advisor detects storage anomalies
Databricks extends Delta Sharing to AI and aims to break down data silos
AI voice agents: Oracle details a LiveKit architecture on OCI
Sources
- 01
Cisco (12 October 2026). “Cisco Advances Scalability and Openness at OCP 2026”. Announcement of the Silicon One G302 switch and the USFP development project with NVIDIA.
- 02
Gartner, B. and Eatherton, W., Cisco Blogs (12 October 2026). “Cisco and NVIDIA Announce USFP: Expanding the Path to AI Connectivity”. Details on lanes, aggregate capacity and the gains announced for the USFP form factor.
Djinn Stealer: the malware targeting companies’ cloud and AI credentials
Cybercriminals are changing targets Cyberattacks are no longer aimed solely at data or workstations. The credentials used to access cloud platforms, artificial intelligence environments and development tools have become highly sought-after assets. It is against this...
Claude Tag turns Slack into a genuine agentic workspace
AI agents settle at the heart of collaborative work Artificial intelligence is no longer limited to assistants accessed in a chat window. With Claude Tag, Anthropic is taking a new step by building an AI agent directly into Slack. Available in beta for Claude...
IBM and OpenAI want to arm businesses against machine-speed cyberattacks
Defenders must now fight AI with AI Cyberattacks are evolving at unprecedented speed. Thanks to artificial intelligence models, attackers can automate the search for vulnerabilities, analyse code in seconds and quickly identify the most exposed systems. To respond to...
Open-source security scales up: IBM, Red Hat and Palo Alto join forces
Cyberattacks push IT giants to join forces Open-source components are present in virtually all modern applications, from cloud platforms to business software. This dependence, however, comes with a growing risk: vulnerabilities are now discovered and exploited much...
With Lambda, AWS prepares cloud infrastructure for autonomous AI agents
Serverless enters a new phase The cloud is evolving to meet the needs of a new generation of applications based on agentic artificial intelligence. As AI agents become capable of carrying out complex tasks for hours at a time, traditional serverless architectures are...
With Code Layers, Figma brings design and development together for good
A new step towards building apps without boundaries Design and software development have long followed two separate paths. Designers imagined the interfaces, developers then translated them into code, with many back-and-forth exchanges and sometimes discrepancies...
Google Chrome sees what you see: Gemini can now analyse your screen
Chrome takes a new step towards the intelligent browser Web browsers no longer simply display web pages. They are gradually becoming genuine assistants capable of understanding the context in which users are working. With the new “Select from screen” feature, Google...
SpaceX buys Cursor: agentic AI becomes the new standard in software development
An acquisition that reaches far beyond the software world SpaceX’s acquisition of Anysphere, the company behind Cursor, for an estimated $60 billion marks a major turning point in the tech industry. Behind this spectacular deal lies a much deeper transformation: the...
Europe’s AI takes shape: OVHcloud is developing its own LLMs
OVHcloud wants to move from cloud to artificial intelligence Long recognised as a major player in European cloud, OVHcloud now aims to play a much bigger role in the artificial intelligence ecosystem. At the VivaTech trade show, Octave Klaba, the group’s founder and...
F5 strengthens its WAF to tackle the cyber threats of the AI era
Cyberattacks are evolving faster than patches Artificial intelligence is transforming corporate cybersecurity, but it is also benefiting attackers. New models capable of rapidly identifying vulnerabilities or automating certain exploitation phases are dramatically...
